Best Electricians Screwdriver Set (2019 Review)

Every electrician needs a good set of insulated screwdrivers. Messing around with a useless set of insulated screwdrivers is not only a bad idea from a safety perspective – but it’s a waste of your time.

There’s no need to work with poorly made screwdrivers when there are so many quality options out there. But they can be hard to find – and that’s where we come in.

In the quest to find the ideal set of electrician’s screwdrivers – we review the Top 10 Insulated Screwdriver sets on the market.

We’ll go over the build quality, safety ratings, impact resistance, how comfortable the grips are – and much more.

best overall rating
Milwaukee Insulated Screwdrivers
  • High-quality carry case
  • Impact and flame resistant
  • Safety rated up to 1000 V
premium choice rating
Klein Insulated Screwdrivers
  • Excellent build quality
  • Double layered insulation
  • Features three sizes of cabinet, keystone and Phillips tips
great value rating
Wiha Insulated Screwdrivers
  • Excellent value for money
  • Soft non-slip handle finish
  • Lightweight and comfortable to use

Milwaukee Insulated Screwdriver Set – Best Overall

The Milwaukee 10-piece insulated screwdriver set is one of the best options because it combines a large number of screwdrivers and builds quality of the Klein set with a more affordable price. Rated up to 1000 V, these screwdrivers are also flame-retardant and impact-resistant.

These are some of the most durable insulated screwdrivers on the market, so if you’re looking for a set that is going to last you for years, this is your best choice.

Since these screwdrivers feature dual-layer insulation, you’ll be able to see when the screwdriver has been rendered unsafe by wear and tear. The screwdrivers even have obvious ID markings, so you can see if a coworker has taken a bit too much of a liking to your tools.

Even the carry case that comes included with these screwdrivers is impressive, with a fitted EVA foam design that will protect your tools when they’re not being used.

There are lanyard holes placed on the bottom of each screwdriver. Simply place your lanyard in between the hole and start using one of the screwdrivers. Because of this feature, you’ll never have to worry about it falling off your hands by accident.

The ¼” inch screwdriver works well with circuit breakers. Plus, the insulation from the handle and the shaft will keep you safe from getting shcoked. Overall, we highly recommend the Milwaukee Insulated Screwdriver set.

Check Price
What We Like
  • Excellent value for money
  • Dual layer insulation provides a visual wear indicator
  • Impact and flame resistant
  • High-quality carry case
  • Safety rated up to 1000 V
What We Don’t Like
  • Non-magnetic tips

Klein Insulated Screwdriver Set – Premium Choice

If you’re willing to spend a little bit extra on your insulated screwdriver set, then this variety of screwdrivers from Klein is your best choice.

Featuring dual-layer insulation, these screwdrivers offer unrivaled protection from electric shocks, and they’re rated to withstand up to 1000V.

These screwdrivers are also a lot more comfortable than competing models, with a cushion grip handle that keeps your hand from getting sore even after extended use.

This kit comes included with cabinet, Keystone, and Phillips tips, and they all come in three different sizes, further enhancing this screwdriver set’s versatility.

The Klein insulated screwdriver set even comes included with a high-quality nylon carrying case that includes custom-fitted pockets for each screwdriver.

Plus, it features a tool tether accessories that keeps the screwdriver close at hand when you’re working on tougher projects.

With two layers of insulation, electricians will remain safe from shocks when working on live circuits. If you’re willing to pay more for quality, then the Klein Insulated Screwdriver is your best bet.

Check Price
What We Like
  • Excellent build quality
  • Double layered insulation provides protection against electric shock
  • Comes included with nine different tips
  • Impressive carrying case
  • Features three sizes of cabinet, keystone and Phillips tips
What We Don’t Like
  • Very pricey

Wiha Insulated Screwdriver Set – Great Value

On the other hand, you may be looking to save some money on your insulated screwdriver set, and in that case, you may choose to opt for this one from Wiha.

Each of Wiha’s tools are individually 10,000 tested for insulation integrity. The Wiha Insulated Screwdriver Set is super tempered and hardened for longer performance, which is great for those long weekend projects.

For about a tenth of the price of the Klein set, you’ll get five insulated screwdrivers that are rated to 1000 V. These screwdrivers feature molded handles which are designed to put up with the daily wear and tear of a hectic work environment.

These screwdrivers feature Wiha SoftFinish handles which aren’t cushioned, but they still have a comfortable matte finish that also stops them from slipping out of your hands.

The tips are precision-machined to ensure that they’re the perfect shape and size and they are also hardened and tempered so that they’ll last longer. If you’re wanting a pair of tools that gives your more bang for your buck, then the Wiha Insulated Screwdriver Set is a great option.

Check Price
What We Like
  • Soft, non-slip handle finish
  • Affordable price
  • Better build quality than other cheap sets
  • Relatively light
What We Don’t Like
  • Handles lack a hard tail
  • Poorly-built case

MLTools Insulated Screwdriver Set

Don’t even bother buying the MLTools Insulated Screwdriver Set. Good screwdrivers are designed with magnets that can withstand years of abuse. But, these screwdrivers don’t fit that description.

The blade on the larger flatheads began to warp in under a week. Within a couple of months, the smaller flat-tips started to break under moderate usage. If you’re looking for drivers for everyday usage, look elsewhere.

Every electrician can appreciate a lightweight screwdriver set, but this set feels like a toy.

The magnetization might hold onto the screw and get it out of tough spots, but the #2 screwdriver is unreliable.

We do not recommend the ML Tools Insulated Screwdriver Set for professional electricians. Even for DIY work, it’s difficult to install the tips for the 480 panel. Stay away from this set if you can.

Check Price
What We Like
  • Well insulated
  • Hollow ground, parallel edges for slotted screwdrivers
What We Don’t Like
  • Non-magnetic tips
  • Low-Quality Flatheads
  • Weak Steel Construction
  • Crooked Shafts
  • Easily Broken

Wera Insulated Screwdriver Set

The Wera Insulated Screwdriver Set make good tools for light home and professional usage. It consists of insulated VDE blades for work up to 1,000 volts. Due to its Kraftform plus handle, you won’t experience any blisters or calluses while it’s in use.

We like its hard gripping zones, which can be used for working on soft zones due to its high torque transfer. But if you place it the screw inside an isolator, there’s a chance the screw will snap. So give them a chance if you want a medium range set inside your tool box.

Check Price
What We Like
  • Screw rack included for better organization
  • Kraftform handle that provides maximum torque transfer
  • Laser tip etching
What We Don’t Like
  • Awkward coloring matching
  • Small straight blades begin to warp after extended usage
  • Small handles (can be inconvenient for larger hands)

Bahco Insulated Screwdriver Set

Bahco’s Insulated Screwdriver Set is a good mid-tier set for medium and heavy-duty projects. It features chrome blades that resist corrosion and can be easily cleaned. Also, its black oxide tips prevent chrome chipping which stops the work area from getting contaminated.

While they make an okay pair of 1,000 V insulated screw drivers, its quality and price don’t seem to match. For instance, the screw heads flex side to side, making them difficult when working on angles. Give them a shot, but know that there are some better options around.

Check Price
What We Like
  • Suited For Professional Usage
  • Provides Maximum Transmission
  • Easily Cleaned Blades
What We Don’t Like
  • Screwheads can bend in half
  • Awkward Build Construction

Dewalt Insulated Screwdriver Set

If you need a pair of average screwdrivers, the Dewalt Insulated Screwdriver Set is a good option. For added organization, the screwdriver set has color-coded sections for easy tool selection.

Their sand blasted tips and precision machined grips resists slip out and grip faster than other sets. However, the weak magnetic tips and it’s chipped flathead screws places it at a disadvantage. Try it for your home projects, but don’t expect it to have any advanced features that a professional will need.

Check Price
What We Like
  • Easy Grip
  • Color-coded handles for better driver organization
  • Versatile
What We Don’t Like
  • Low durability screw heads
  • Magnetic Tips
  • Uses too much shift and torque in the screw

Greenlee Insulated Screwdriver Set

Up next is the Greenlee Insulated Screwdriver Set. The handles on this piece are worthy of praise, as they allow you to create the maximum torque with minimal effort. This allows electricians to finish the job faster without needing to pay for it in the following morning.

These make good heavy duty screwdrivers, as they can withstand any abuse that you throw at them. They can be on the expensive side, so we can’t recommend them for beginners. Think about this set if you need something for mid-level DIY applications.

Check Price
What We Like
  • Perfect for vehicle storage
  • Dual layer insulation
  • Can Withstand up to 1000 volts
What We Don’t Like
  • Expensive
  • Smaller screwdrivers break easily

Titan Tools Insulated Screwdriver Set

For a standard pair of screwdrivers, look no further. The Titan Tools Insulated Screwdriver Set has 7 screwdrivers all designed with magnetic drive tips. With its contoured cushion grip handles, it feels relaxing on the hands.

The insulated blades are also a plus. But, this set falls short when it comes to durability. The flathead drivers are reported to bend and then break. You should still get them if you need a quick replacement in your tool shed.

Check Price
What We Like
  • Good for Low Voltage Operations
  • Comfortable Handles
  • Hardened Steel Construction
What We Don’t Like
  • Easily Bendable Screw Tips
  • Broken Flathead Drivers
  • Not Suitable for Electric Control Paneling

Felo Insulated Screwdriver Set

Last on our list is the Felo Insulated Screwdriver Set. This set comes with 6 screwdrivers, all designed with ergonomic handles. As a result, these screwdrivers feel comfortable on your hand, giving users the ability to create up to 30% more torque.

It can be difficult to find the right screwdriver type in such a crowded tool box. However, this screwdriver has the blade types printed directly on and on top of the handle grips. For beginner workmen, this will save you a lot of time.

But, electricians with larger hands might not like the grip of this device — still, its a good set of insulated screwdrivers that can handle most repair operations at home.

Check Price
What We Like
  • Lifetime Warranty
  • Precision Mechanical Black Tips
  • Ergonomic Handle
What We Don’t Like
  • Smaller grip than most screwdriver sets