|
Subject - weather proof boxes for luminaires for log homes
|
|
techsol
|
I recently came upon a problem with mounting carriage lights to the outside of a newly built log home. The "electrician"(and I use the term loosely)before me used standard pvc receptacle boxes and water ruined not only the fixtures but the gfci receps as well. My question is: Has anyone encountered a box designed for exterior mounting for a log home? I ran across one years ago in a trade paper but cannot remember the manufacturer. Too many ads over too many years I guess. Thanks in advance.
Norman
The difficult we do imediately, the impossible costs a little more!
|
|
JimmyDee
| Never worked on a log house but have seen where the electrician installed the outside plugs in WP Bell boxes. I know that is a brand name but don't know what else to call them. He cut them in to make the box surface flush with the front of the logs. Jim
|
|
techsol
| Thanks Jim. will look into them. Any port in a storm.
|
|
JimmyDee
| They were actually the WP surface mounted type of boxes and they had been cut in the way I described. Jim
|
|
schof2
| Just finished huge log cabin. All outdoor boxes were cut out at factory to accept metal old work box to fit flush with face of logs
|
|
JimmyDee
| Schof2, I would like to welcome you to the Electrical Knowledge forum. I hope your experience here is as good as mine has been and we welcome your comments and ideas. I can see where this would work great on square cut logs but how about the natural round cut logs.  Jim
|